70 HP Refrigeration Chiller D8SK1-7000-BXW-BM844 Semi Hermetic Compressor
Speciafication:
Compressors in the higher capacity range need some form of capacity control to accommodate varying
refrigeration load. The capacity control kit supplied by DWM Copeland will reduce the refrigeration capacity along
with a similar proportional reduction in Power Input. This ensures optimum performance even in part load.
Capacity control is also required when the condensing pressure falls with a drop in ambient air temperature.
The compressor suction condition, refrigerant volume and mass flow rate will remain unchanged.
Methods of Capacity Control
There are many methods of capacity control for Semi-Hermetic compressors but DWM Copeland use the “Blocked
Suction method” and for the D3D Over Re-expansion method known as Moduload.
Note: Oil circulation in systems with capacity control is more critical.
The 4S, 6S & 8S compressors have an internal capacity control, they work on the principle of blocking the suction
gas passage to two or more cylinders. They require the use of a special cylinder head and a control valve with
solenoid coil. These items may be ordered installed at the factory or in a kit form for later installation.
The suction port of the valve plate will be closed by a control piston (blocked suction). To prevent transport damage
the solenoid valve is supplied loose and the cylinder head is fitted with a shipping plate, therefore the shipping plate
with gasket must be removed and the solenoid valve with new gasket mounted. Do not put the compressor into
operation with the shipping plate this could result in erratic operation of the control piston and inadequate cooling
capacity.
| Compressor model | D8DH-5000-AWM/D |
| Application | HVAC |
| Horse Power | 70HP |
| Net weight | 376kg |
| Gross weight | 430kg |
Product Tags:
|
|
D8SK1-7000-BXW-BM844 Chiller 70 HP Semi Hermetic Compressor Images
|
